Weathershield Smooth Masonry

DULUX TRADE WEATHERSHIELD SMOOTH MASONRY PAINT is formulated with a unique high-performance acrylic resin that provides guaranteed total protection against all types of extreme weather conditions for up to 15 years. It can be used on most sound, dry exterior masonry, and rendering, plus common brick to provide a breathable and flexible paint film that is both UV and mold & algae resistant.

Key benefits

  • 15 Year All-Weather Protection
  • Excellent opacity

Application information

Coverage
Up to 16m2 per litre

Touch dry
Touch Dry: 30 minutes / Recoatable: 2-4 hours

Thinning
This product can be thinned – see datasheet for full details.

Surface Preparation & Application

Allow all new surfaces to dry out completely. Wash down previously painted surfaces with a detergent solution to remove dirt, grease, chalking paint etc. where practicable. Rinse off with clean water and allow to dry. Carefully scrape back to a firm edge all areas of poorly adhering or defective coatings and rub down thoroughly to ‘key and feather’ broken edges of existing coatings. New or sound bare surfaces should be sealed with a thinned first coat of Weathershield Smooth Masonry Paint (add up to 1 part clean water to 5 parts paint). Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with a coat of Weathershield Stabilising Primer.
Note: Do not seal sound new or bare surfaces with stabilising primer.

Storage

Store between 5oC to 40oC

Packsize

2.5LT9LT

Finish

Matt