Satinwood
DULUX TRADE SATINWOOD is a Solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required. Suitable for use on interior wood and metal surfaces.
Key Benefits
- Tough, durable finish
- Dirt Resistant
Application information
Up to 17m2 per litre
Touch dry
Touch dry: 4-6 hours / Recoatable: 16-24 hours
Thinning
Thinning not generally required.
Surface Preparation & Application
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax.
New or bare surfaces should be primed with an appropriate Dulux Trade primer.
Thoroughly rub down previously painted surfaces,using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
